[Answer ID: 12575]
What does the message on the LCD display indicate when the ERROR LED is turned on? (TS-VHL series)
Created 05/19/2011 02:52 | Updated 09/22/2011 03:41
The contents displayed on the LCD when the ERROR LED is ON are described below:
The contents can be switched by the [DISPLAY] button on the product.
|LCD Message||Description||Corrective Action|
The hard disk to start cannot be
Can't Load Krnl!
|The firmware is corrupted.||See details|
|The product is currently running on
the UPS battery. The system will be shut down safely.
|I10||SYSTEM I10 TOO HOT!||A rise in the system temperature may have exceeded the allowable safety value.||
|Abnormal fan rotations.||Remove foreign materials and dust on the fan by a pair of tweezers or an air duster.
If the error appears again, contact to our support center.
|The rise in the system temperature has exceeded the guaranteed value.||See details|
|E14||RAID Arrayx E14
|RAID array X cannot be mounted.||Run the RAID array disk check in the Web Admin interface.
|E16||HDx Error E16
HDx Not Found
|Unable to find hard drive X.||See details|
|E22||HDx Error E22
HDx Can't Mount
|Mounting of hard drive X has failed.||See details|
|The TeraStation for the backup
target cannot be found.
|From the Web Admin interface, navigate to [System]-[Failover] to reconfigure the backup TeraStation for failover.|
|E30||HDx Broken E30
Replace the DISK
|An error occurred, so hard drive X
was removed from the RAID array.
|Replace hard drive X.
OS / Hardware
Was this answer helpful?
Please tell us how we can make this answer more useful.